With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Shutters or bi-fold doors are easily found at the curb or thrift stores. This project was made from a bi-fold door that I cut in half.
You will need to remove every other slat. You can do this by using a claw hammer to break the slat you're removing. I used my Dremel Max to flush cut ...
If you use a hammer to remove every other slat, fill the empty holes with some spackling or wood putty. Because I used the Dremel Saw Max to flush cut...
After removing your slats, you can see that you will easily have room to hang your magazines. Tip: I save my removed slats to use as paint stirrers.
I used a paint sprayer to get a great (easy) coverage. If you don't have a paint sprayer, you can use spray paint. Painting by hand is another option...
I used a can of spray paint for the topcoat. Again, you can use a paint sprayer or paint by hand, being careful to not get any runs or drips.
I used a vinyl cutter to add a decorative swirl. You can use a variety of embellishments, including wood, or some old decorative hardware. There is a ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam6,393 views
41 favorites
Posted:
Feb 27, 2012
License:
None (All Rights Reserved)
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »