loading

Maker name : Shivaraju. r

Location: Banjarapalya E4D maker space

Materials:

  1. Led's ( red and yellow )
  2. Wires
  3. Watter bottle cap
  4. Wooden peace
  5. 9v Motor
  6. Thread
  7. Metal wire
  8. Pully

Tools:

  1. Saw
  2. Soldering gun
  3. Glue gun
  4. Cutting plier
  5. Hand drill

Step 1: Make Hole in Water Bottle Cap's

Take two water bottle caps and make a hole with the help of hand drill. Then take the Led's solder the wires to positive and negetive sides after that fix the Led's in the water bottle caps as shown in the image.

Step 2: Connect Led's to the Motor

Take one 9v motor and fix it to the Led's positive and negetive wires as shown in the image.

Step 3: Fix All Components to the Wooden Peace

Take all components and fix it on the wooden peace with the help of hot glue.

Step 4: Make Metal Strip

Take a metal wire and tye the thread by using the hot glue.

Step 5: Fainal Project

Fainelly your project is compleated .

Step 6:

<p>Is the motor generating the electricity or is that piece of wire? Could you connect the spinner thing on the motor to something else and still light the lights up? </p>
<p>Very interesting! I had no idea you could do this. Pretty cool :)</p>
<p>thanks bro</p>

About This Instructable

884views

11favorites

License:

More by shivaraju:Laptop cooling  pad Low cost vegetable cutter  DIY 50 cent Water Heater  
Add instructable to: