(BTW this is my first Instructable so if you could Comment that would be great XD)
Step 1: Step 1: Materials
Named on each picture!
DO NO NOT FORGET SAFETY GLASSES WHEN USING A DREMAL ROTARY TOOL!!!!!!!!!
Step 2: Step 2: open the headphones
After they are separated plug them into your ipod and make sure they still work. (which they should unless you snapped off the wire)
After that pri off the bottom of the headphone but be careful not to damage the speaker inside.
Next you want to throw away the bottom of the headphone and make suer the speakers still work. Then proceed to the next step.
Step 3: Step 3: Make the hole in the box!
then using electrical tape secure the sharp edges do they won't cut the wire or your fingers.
Step 4: Step 4: Put it all in the Box!!
now put in the two sspeakers with one over-lapping the other. (if you removed all the casing in on the speakers they will fit without a need to over-lap them)
finally put the headphone jack out of the slot in the box and plug it into your Ipod.
Step 5: Step 5: YOU ARE DONE
this took my about 30 min but its ok if it took you longer.
TIS A VIDEO