Simple Animatronics (robotic hand)

Step 7 Wrist

Remove the tape from the wrist-end of the tubes and insert them in a foot or so of tubing.
To stiffen things up a bit, attack that old CD-cover again and snip out one or two pieces as per picture. Glue it all together leaving an inch for the wires. Some extra tape might also be in place here.

Comments

[ChocLot]

Hey Tanntraad, do you have any ideas on any other material other than the CD-cover to separate the wrist and the fingers because to me, that part is hard. I have to have an answer before May 1, 2008.

[tanntraad]

Hey! You can use almost anything! Plastic, wood metal etc. -even stiff cardboard:)