Print PDF
Favorite
Email
Step 10Attach your comb
Pass a screw through the hole you drilled in the step prior.
Once it is passed through, place 2 - 4 washers on it. The point of these washers is to push the comb towards the other section of ruler (once mounted).
Next, pass the screw through the middle hole, in the section of ruler with the motor, from the inside out. Use your bolt to securely fasten it in place.
Once it is passed through, place 2 - 4 washers on it. The point of these washers is to push the comb towards the other section of ruler (once mounted).
Next, pass the screw through the middle hole, in the section of ruler with the motor, from the inside out. Use your bolt to securely fasten it in place.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
