Print PDF
Favorite
Email
Step 18Power connections
Before you start, make sure at least one battery is not in the battery holder or the motor will turn on, making your job here very difficult.
Solder the red wire from the switch to the red wire from the battery holder and cover it with electrical tape.
Solder the black wire from the switch to the black wire from the battery holder and cover it with tape as well.
Solder the red wire from the switch to the red wire from the battery holder and cover it with electrical tape.
Solder the black wire from the switch to the black wire from the battery holder and cover it with tape as well.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
