Print PDF
Favorite
Email
Step 11Attach CDs
If necessary, make or widen holes in the servo horn with a 1/8" drill bit to accommodate the zip tie.
Zip tie the CDs to the motors in such a way that the motor is at the center of its rotation point and the two outer holes are perpendicular to the handset.
Also, keep in mind that the outer notch was cut to allow the switch lever to stick through.
Zip tie the CDs to the motors in such a way that the motor is at the center of its rotation point and the two outer holes are perpendicular to the handset.
Also, keep in mind that the outer notch was cut to allow the switch lever to stick through.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
