Introduction: Simple Clay T-Rex

Picture of Simple Clay T-Rex

I made a simple to do clay T-Rex. Enjoy!

Step 1: Start With Four Peices of Clay.

Picture of Start With Four Peices of Clay.

Begin by getting four pieces of clay.

Step 2: Form the Body.

Picture of Form the Body.

Roll a piece of clay into a ball then roll the tail section by thinning out one side and form the neck area by squeezing upwards at the opposite end.

Step 3: Form the Legs.

Picture of Form the Legs.

Form the legs by rolling a large strand of clay into a form of a leg. Making the claws by rolling white strands of clay and making a point on one end.

Step 4: Forming the Head.

Picture of Forming the Head.

Form the head by rolling the head into a small sphere and then stretch out on one side. Make the lower jaw by stretching a small piece of clay out.

Step 5: Shaping the Arms.

Picture of Shaping the Arms.

To shape the arms roll out two small strands of of clay and then form the claws an attach to the end.

Step 6: Shaping the Eyes.

Picture of Shaping the Eyes.

Shape the eyes by rolling out two small pieces of black clay, and forming into the desired shape for the eyes you would like. Use a sculpting tool to give the eyes a more aggressive look if that is what you would like.

Step 7: Finished!

Picture of Finished!

You have now finished your clay T-Rex have fun but be careful he may bite.

Comments

Coolloom (author)2015-07-28

Nice

About This Instructable

774views

6favorites

License:

Add instructable to: