With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is an easy to build vacuum chamber that is power with a garden hose. you can draw 30 cm of vacuum with your hose. simple and easy way to deg...
you will need the following parts. many of they can be found or scrounged for free is you have the time. 1 - 6" x 24 " PVC pipe ...
this little thing can draw up to and in some cases even more than 30cm of vacuum with only a garden hose. and a only $24 it beats the hell out and exp...
The top and bottom are 1/4 " acrillc . Just trace the tube. Find the center point, and make a circle and inch farther out. cut along the outside line....
use the top and bottom pieces to trace around with a knife to cut out the neoprene. find the center and then cut out the center circle by hand.
drill tow hole just a little bit smaller than the fittings (the vacuum gauge came with a bunch of extra fittings) heat up the fitings with a soldering...
This is the tough part. if you are lucky the pipe you have will have good edges. This one did not. gab a piece of sandpaper and hold it down with the ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »