Introduction: Simple, Easy, Cheap Handlebar Mount for Flashlight

Picture of Simple, Easy, Cheap Handlebar Mount for Flashlight

Sometimes it's so easy you're just waiting for the other shoe to drop. I just used a zip tie and a reflector mount with the reflector removed. I guess you could just mount a whole row of these if you wanted.... 


rustytoy (author)2012-07-24

those 100 lumen led mag lights fight right into those reflector mounts
so you just need two of them to make one.

josefski (author)rustytoy2012-07-24

That's a good idea. I actually tried it that way first. The only problem was that with both reflector mounts hooked to each other, the light ends up sitting about 3 inches away from the bars and shakes around a lot. That's not very useful for trail riding; it's better to keep the light as close to the bars as possible.

SelkeyMoonbeam (author)2012-07-10

Very clever!

About This Instructable




More by josefski:Portable Bike WasherSmartphone Document ScannerKeep Handlebar Grips From Sliding
Add instructable to: