Step 7: Clousures: Sewing Awl
Pull the thread all the way through the leather, leaving approximately 2 inches of thread out on thr back side of the leather.
Holding the thread, pull the awl back through the leather and push it through once more using your design as a guide.
Once the awl is pushed through, pull it back out slightly. This should leave a loop of thread. Push the 2 inch lead thread through the loop.
Pull the awl out and pull the thread taunt on both sides of the leather. Repeat.
On the last push of the awl, work the thread away from the needle and pull about 2 inches free. Snipe the thread and remove the sewing awl.
Tie a double knot and poke the knot into the closest hole.
Feed the key ring through the loop.