Print PDF
Favorite
Email
Step 2The PCB
- I have made the PCB using WinQcad Software it's easy and has a nice autorouting feature. Please download the PDF document which contains the true scale dimensions.
You will see two files :
PCB.pdf and PCB_copper_pour.pdf
the second one has a "mass copper pour" to save your etching solution and to speed up the etching process without affecting your tracks.
- I used the Toner Transfer method draw the tracks, i can say the output is nice. I have included the steps required to make PCB in the following steps.
You will see two files :
PCB.pdf and PCB_copper_pour.pdf
the second one has a "mass copper pour" to save your etching solution and to speed up the etching process without affecting your tracks.
- I used the Toner Transfer method draw the tracks, i can say the output is nice. I have included the steps required to make PCB in the following steps.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
Aug 25, 2009. 11:51 PMsandaru1
says:
i want pic programmer
Reply
Sep 28, 2009. 5:17 AMabloy
says:
can you specify where to put each component in the lay out design?
Reply
 |
Add Comment
|
