Simple JDM PIC Programmer

Step 6 Soldering

The components are soldered.
Note the brown wire, i have made a mistake when routing the PCB in WinQCad, don't worry it's corrected in the attached pdf files.

Notice the drawings on the component side, it's a guide when placing the components in case it's a big project :-)

Comments

[minchansike]

When we building is end .. How to join whit compute ...
What we need ....
What Software must use to connect PC .

[jcorręa2]

Any Software. Winpic, icprog, PICPgm. I prefer to use the PICpgm, bcz it detects pic and programmer, and so you can detect errors by that.

[redbird_is]

The PCB appears different than the PDF of the mask you created. Specifically pins 4 and 5 - the routing & connections are different on your pcb