Step 6: Sights
Add sights (optional). These can be used on many types on K'nex guns. You need:
1 gray 1-clip connector
1 black male joint connector (it is the same height of the gray connector, and has a ball on the end)
6 Y-connectors
2 silver (white) rods
Connect the gray and ball joint connectors to 1 Y-clip each, and connect them to silver (white) rods as in pic. 1. Attach the other Y-connectors to the barrel (see pic. 2), and connect the parts with the rods to those (see pic. 3).
1 gray 1-clip connector
1 black male joint connector (it is the same height of the gray connector, and has a ball on the end)
6 Y-connectors
2 silver (white) rods
Connect the gray and ball joint connectors to 1 Y-clip each, and connect them to silver (white) rods as in pic. 1. Attach the other Y-connectors to the barrel (see pic. 2), and connect the parts with the rods to those (see pic. 3).
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
