With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is a simple laptop stand made from the packaging of a MacBook. Simple to make, and saves the styrofoam from heading to the landfill. Besides the ...
There are a couple of pieces of foam that come with the packaging, use what ever one you want.
Cut the foam to create the stand base, I cut mine right along the seam where the cords where stored during shipping.
I used 3.5" deck screws to hold the foam together. The foam is dense and the screws made a great bond, just don't over tighten as you can strip the ho...
Here is a side view of the stand, as you can see the holes that Apple created in the foam will allow for air flow. Some of the stands have lips on th...
You can still access the sides to plug in your peripherals.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »