Print PDF
Favorite
Email
Step 3Glue
Next, I flipped over the laptop to find good spots to land the rubber feet. I decided to have it rest next to the laptop's feet. I marked the spots on the piece of plywood.
I used E6000 glue. It is a "craft" glue, but it will glue anything. I glued the two stacks of rubber first, then I glued all four down to the wood. Within 24 hours it was dry and they were solid as a rock.
I used E6000 glue. It is a "craft" glue, but it will glue anything. I glued the two stacks of rubber first, then I glued all four down to the wood. Within 24 hours it was dry and they were solid as a rock.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
