Introduction: Simple Lego IPod Holder

Just an easy to build iPod holder. Note I have an iPod 4th gen.

Step 1: Materials

Step 2:

1. 3 of the shortest connectors. 2. 1 of the medium. 3. 1 of the large.

Step 3:

4. You will need 4 of these

Step 4:

5. You will need 2 of both of these.

Step 5:

6. You will also need 2 of each of these.

Step 6:

(list from top to bottom of image.) 7. You will need 2 of the top connector. 8. 4 of the next. 9. 4 of the longer connector. 10. 9 of the bottom connector. 11. 2 of the next piece. 12. And 2 of the bottom piece.

Step 7: Assembly

Step 8: 1

Step 9: 2

Step 10: 3

Step 11: 4

Step 12: 5

Note: the bottom connecting rod is the longest.

Step 13: 6

Step 14: 7

Step 15: 8

Step 16: 9

Note: these are the longest connectors with holes.

Step 17: 10

Step 18: 11

2x

Step 19: 12

Step 20: 13

Step 21: 14

Step 22: 15

Step 23: 16

Step 24: 17

Step 25: And Now Add Your IPod

Note: I have a red "Griffin" case.

Comments

author
789b10 (author)2013-08-15

Good job i made one but my own design mine you have to slide it in and mine is a 4th gen too:)

author
Redn2000 (author)789b102013-08-15

Nice glad I inspired you.

author
TheMrCOOLguy2 (author)2013-08-14

Very cool
Can it charge with the case on?

author
Redn2000 (author)TheMrCOOLguy22013-08-14

Unfortunately it can't, however the case can also good back on itself and still hold the iPod while charging.

About This Instructable

581views

12favorites

License:

Bio: Currently low on my free time. I'll try to post what I can and hope you enjoy making each one. My main joy is ... More »
More by Redn2000:Tahu modifiedRandom M.O.C.Simple Lego iPod Holder
Add instructable to: