Print PDF
Favorite
Email
Step 3Fitting the Light
From the top end of the tube measure down about one inch, fold it over and cut a slit through the tube.
Make sure the slit is big enough to let the light slide through with some resistance.
From the bottom, turn the tube one quarter rotation, measure down about an inch and a half, cut another slit. This time, the slit must be big enough to let the front end of the light slide through.
The reason for the quarter rotation is because in the end product, if you wrap this around your handlebars correctly, the tube won't be all twisted up.
Now, you're done! Click on for the mounting instructions!
Make sure the slit is big enough to let the light slide through with some resistance.
From the bottom, turn the tube one quarter rotation, measure down about an inch and a half, cut another slit. This time, the slit must be big enough to let the front end of the light slide through.
The reason for the quarter rotation is because in the end product, if you wrap this around your handlebars correctly, the tube won't be all twisted up.
Now, you're done! Click on for the mounting instructions!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
