loading

Step 1: The Circuit

The circuit is very simple. You can also use a breadboard and some jumper cable.

Follow the scheme, and solder the components on the perfboard. Use a RGB common cathode and 3 resistor. Use the 120 Ohm resistor for blue and green pin and 100 Ohm for red pin.

About This Instructable

3,497views

31favorites

License:

More by masteruan:House's Monitoring Consumption With Arduino UNO Arduino 101 Bluethooth IOS Pulse Sensor C51 4-Bit Clock Kit 3D Printed Enclosure 
Add instructable to: