loading

Step 2: Plug the circuit

Now you are a RGB circuit for Raspberry Pi. Plug the circuit on GPiO in this position.

The Blue pin in the 25

The Green pin in the 24

The Red pin in the 23

Pay attention of the numbers of pin. In this project we use a GPIO pin number. for thi reason we follow the GPIO numeration. Like in the image, you can view the pin number and the GPIO number. The RGB led use the GPIO pins 23, 24 and 25. Also the RGB led use the GND pin between the pins 24 and 25.
Please double-check before start your system. You can burn Raspberry Pi.

About This Instructable

3,585views

31favorites

License:

More by masteruan:House's Monitoring Consumption With Arduino UNO Arduino 101 Bluethooth IOS Pulse Sensor C51 4-Bit Clock Kit 3D Printed Enclosure 
Add instructable to: