Simple Rideable Hovercraft

Step 4 Skirt underside

Poke a hole in the center of the coffee can lit. Attach it to the bottom of the hovercraft with small skrews. It goes over the plastic sheet and pins it to the wood. This helps with lift.
Cut six vent holes in the tarp with your razor. Make shure to space them so there is plenty of space between each hole. If they are too far away from the center they will be plugged when the sheet lays against the floor.

Comments

[Da Eejiot]

Sure was spelt wrong

[ballerboi]

(removed by author or community request)

[Gamernotnerd]

It is a word, look it up.

[proffesor cuddles]

i cant wait to try this