Print PDF
Favorite
Email
Step 11Drill
Drill holes in the aluminum case to mount your volume dial, audio jack, pull switch and power plug. Also drill out some holes so that you can here the speaker.
I wanted to match the holes already on the speaker, so I rubbed permanent ink on the speaker and while it was still wet, transferred this to white gaffers tape and stuck this to the case as a drill guide. I then drilled.
I wanted to match the holes already on the speaker, so I rubbed permanent ink on the speaker and while it was still wet, transferred this to white gaffers tape and stuck this to the case as a drill guide. I then drilled.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
