Step 13: Fasten hardware
Securely fasten all of your hardware to the aluminum casing.
Discover that your audio jack shorts your circuit when it is installed in the casing. Cover the hole for the audio jack with contact paper and drill a hole in the top piece of acrylic to install the audio jack. Install it again.
Put your circuit boards in there. I glued the audio board to the inside of the case. The main one I just let sit on the bottom as there are so many wires attached to it, it is not moving anywhere.
Discover that your audio jack shorts your circuit when it is installed in the casing. Cover the hole for the audio jack with contact paper and drill a hole in the top piece of acrylic to install the audio jack. Install it again.
Put your circuit boards in there. I glued the audio board to the inside of the case. The main one I just let sit on the bottom as there are so many wires attached to it, it is not moving anywhere.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
