Print PDF
Favorite
Email
Step 3Cut some spacers
Cut out some mat board spacers on the laser cutter using the file below.
The setting I used for the vector cut were:
Speed: 100
Power: 40
Frequency: 2500
The setting I used for the vector cut were:
Speed: 100
Power: 40
Frequency: 2500
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Apr 7, 2012. 8:37 PMdlapham
says:
Can't I just use some plastic washers from Lowes?
Reply
 |
Add Comment
|
