Introduction: Simple USB Switch

This is the most simple USB  switch I could come up with. It doesn't require IC's or any other complex circuitry.
All it requires is:
One 4pdt switch
Two USB female ports
one USB cable
and a case

Step 1: Prepare the Case

this will differ depending on what you use, I used an old power brick.
Just make a hole for your toggle switch and USB ports

Step 2: Wire the Switch

Now the switch needs to be wired.
It doesn't really matter what order the wires are in, as long as they line up on the switch.

Step 3: Test!

Make sure double check the wiring before testing!
It's a good Idea to test this before you put in the case, otherwise you might get all put together, plug in, and it doesn't work

Step 4: Assembly

Now put your USB switch in it's case and your done

4th Epilog Challenge

Participated in the
4th Epilog Challenge