Print PDF
Favorite
Email
Step 10The initial test!
Right, now we can give it a dry run to see if it goes bang or works! Plug in using a 3A fuse and an RCD device, install your starters and switch on...
DONT look directly at the tubes, UVA is very bad for your eyes! Both tubes should light and within 10 minutes be at full brightness. The workshop I tested mine in is fairly cold but the tubes were very bright in a short time.
If all is well, switch off and on to the next stage...
DONT look directly at the tubes, UVA is very bad for your eyes! Both tubes should light and within 10 minutes be at full brightness. The workshop I tested mine in is fairly cold but the tubes were very bright in a short time.
If all is well, switch off and on to the next stage...
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
