Print PDF
Favorite
Email
Step 4Mount your On/Off switch
Now mount your on/off switch to the front panel. I like to use big chunky toggle switches but you might opt for a nice illuminated type. Mount close to the right hand side of your box.
Drill carefully from outside in, the thin covering of your toolbox tears easily. You may have to cut some of the box lining out to get your switch to mount properly. I found using a nice sharp scalpel helps.
Drill carefully from outside in, the thin covering of your toolbox tears easily. You may have to cut some of the box lining out to get your switch to mount properly. I found using a nice sharp scalpel helps.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
