Print PDF
Favorite
Email
Step 7Encase the gubbings!
Next, use one of the vertical dividers saved when you stripped your box out to make a compartment for the working parts. You will need to drill a hole big enough to allow the cabling to pass into the lamp compartment (see photo).
You can glue the divider in but I reccommend just pushing it in so it can be removed for repairs if you need to.
You can glue the divider in but I reccommend just pushing it in so it can be removed for repairs if you need to.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
