Introduction: Simple Wheeled Robot

in this instructable ive made simple robot car using

plastic bottle cut to form a sheet

battery

cd

bottle cap

a piece of board

Step 1: Cut a Plastic Bottle

Picture of Cut a Plastic Bottle

Step 2: Roll It to Form a Tube

Picture of Roll It to Form a Tube

Step 3: Now Fix the Geared Motor to Either Ends of Tube

Picture of Now Fix the Geared Motor to Either Ends of Tube

Step 4: Make a Hole on Centre of Tube So to Connect Wires

Picture of Make a Hole on Centre of Tube So to Connect Wires

Step 5: Fix the Geared Motor

Picture of Fix the Geared Motor

Step 6: Now Attach Bottle Caps to Shaft of Motor

Picture of Now Attach Bottle Caps to Shaft of Motor

Step 7: Connect the Battery to Motor

Picture of Connect the Battery to Motor

Step 8: Attach the Cd to Wheels

Picture of Attach the Cd to Wheels

Step 9: For Balancing Attach Two Pieces of Card on Either Side..... Robot Is Ready for Action

Picture of For Balancing Attach Two Pieces of Card on Either Side..... Robot Is Ready for Action

Comments

nemo13003 (author)2017-03-28

it is amazing :p

About This Instructable

528views

1favorite

License:

Bio: Sciency Guy who is always trying to make some innovative projects,check out what i made in my instructable,Follow me if you think i ... More »
More by ROBO HUB:How to Make Custom Paper Fidget Spinner Without BearingsDIY Solar Powered Phone Charger Under 5$How to Make Pencil Sharpener Machine From Cardboard
Add instructable to: