Make your medal artwork pop in the dark. It looks cooler in the dark but my camera doesn't like low light.

Step 1: Get Materials

You will need:

-Two watch batteries
-A small piece of cardboard
- An LED
-And metal art

Step 2: Assemble Lighting

Glue or tape two watch batteries on to a piece of cardboard, touching negative to positive. Then bend the led to tightly clamp around the batteries like shown. Make sure the longer side of the LED is on positive and the smaller lead is on negative.

Step 3: Install Light

Tape the cardboard to the back of the art where no lines show through.

Step 4: Finish

Flip the art over and turn put the lights. Now your artwork is much more awesome

About This Instructable




More by Kale_3d:RFID access system Arduino Calculator CD case calendar 
Add instructable to: