Print PDF
Favorite
Email
Step 1Parts
It's hard to understand, why some people build circuits with so many parts. You can build the same thing with less parts and it still works.
You will be surprised by the number of parts needed:
-1x ATTiny26
-7x LED (preferably diffused)
-7x 160 ohm resistor
-push button
-9V battery clip
This part is for the voltage regulator:
-1x 60 ohm resistor (power rating 0.3W or more)
-1x 5.1V zener diode (power rating 0.5W or more)
Sadly, I never take pictures of my parts. I always forget.
You will be surprised by the number of parts needed:
-1x ATTiny26
-7x LED (preferably diffused)
-7x 160 ohm resistor
-push button
-9V battery clip
This part is for the voltage regulator:
-1x 60 ohm resistor (power rating 0.3W or more)
-1x 5.1V zener diode (power rating 0.5W or more)
Sadly, I never take pictures of my parts. I always forget.
| « Previous Step | Download PDFView All Steps | Next Step » |
i'm going to do this as my first real project.
thanks for the instructable
P.-S. :do you know where to get the materials?radioshack?
-alex