Introduction: Single Band Bracelet
you only need 13 bands. Any color
Step 1: Set Up
first you take 1 band and place it peg 1.
Step 2: Next Step
loom should look like this. Then place the bands on pegs
Step 3: Start Looming
take the band that connects 37 and 34. Take the band on 37 and loom it onto peg 34. Then repeat all the way up.
Step 4: Finishing
Your loom should look like the picture
Step 5: Take Off
gently tug the bracelet off and put a s-clip or a c-clip on the end.
look good