With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
The skateboard bookshelf can be made from new or old skateboard decks. With just a bit of time you can have a neat adjustable-height bookcase that wil...
for this project you will need: 2 threaded rods 16 bolts 16 washers 2 L shelf brackets drill or right angle driver (we used a Craftsman RAID) 2 skateb...
Our threaded rods were a bit big for the skateboard truck holes so we expanded the holes with our RAID driver.
First put nuts about 4 inches up. Put a washer on each one.
Put the rod through the first skateboard, and then put another nut on the opposite side. Make sure the rods are even and tighten down.
Screw on 4 more nuts to the other side and slide the skateboard onto that side. Go about 7 inches down. And again, tighten down the bolts.
Next you want to attach the L brackets to the bottom of the top deck. A drill isn't likely to fit between the decks; this is the real reason we used ...
Finally, attach it to the wall and fill it with your favorite books! Show off the art on the bottom of your old skateboard decks, and bask in the adm...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »