Print PDF
Favorite
Email
Step 7Make LED assemblies
In step five we drilled the Aluminum strips for the LEDs, here we add the LEDs to the strips and prepare them for inserting into the skateboard.
1. Insert eight white LEDs into one strip, attach using 5 minute epoxy.
2. Solder all anodes together.
3. Repeat steps one and two with the red LEDs.
1. Insert eight white LEDs into one strip, attach using 5 minute epoxy.
2. Solder all anodes together.
3. Repeat steps one and two with the red LEDs.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
