Knex pinball machine I made in early 2012.  An expansion of the Knex Electronic Arcade set. 4 paths, one network.

URL: http://www.youtube.com/watch?v=0gau4tKaMLk

Remove these adsRemove these ads by Signing Up

Step 1: Attaching the pinball machine to the table

Picture of Attaching the pinball machine to the table
Grabbed Frame 46.bmp
Grabbed Frame 45.bmp
Grabbed Frame 44.bmp
Grabbed Frame 43.bmp
The first picture is for the middle of the back legs.  The next two are for the back corners, and the final two are for the front legs.

Step 2: Dual Track Connector Path

Picture of Dual Track Connector Path
Grabbed Frame 32.bmp
Grabbed Frame 30.bmp
A new kind of path I developed during construction.  Just as smooth as gold connector path, and almost as versatile, a good substitute for those without many gold connectors (like me!).  Turns and drops are easy, but sometimes attaching it can be a challenge.  Additional flexi-rods can be attached to the bottom of the connectors to add additional support.
Fantastic! A pinball-ball machine. Great job!
JonnyBGood2 years ago
I have a set like that myself, but I never went that crazy with it! Very very awesome!
KneXtreme2 years ago
Nice! I been wanting to try and ad on to my electronic arcade for awhile. Glad to see somebody did so. Great job!
jaden1272 years ago
wow. this is quite impressive. :)
That's incredible! It's very cool to see that it's based on an existing knex set.
And the song makes it complete ;p