Introduction: Skorpion

Picture of Skorpion

A knex Skorpion! Well... What else do I say? 
Oh ya! Bring out the PROS and cons!!!!

Removable mag
Looks like the real Skorpion! (just take off the stock and it does)
Really comfy
Quite accurate
50 foot range

shoots green rods
Stock kinda sucks

Primary 4/5- quick loading times, and good power, and fast pin pullback
Secondary 4/5- This'd be perfect for a side arm, it just uses quite a bit of pieces
Fun gun 4/5- nothing new about it..... but what isn't fun about a gun?


Step 1: The Magazine .

Picture of The Magazine .

Title says all. If you want quick loading, make two or three!

1: Make/gather
2: Add white rods to that one part, and add those things
3: Put the last one on
4: Add those things
5: Add elastics and you're done!

Step 2: Handle

Picture of Handle

ummm..... This is the handle....

1: Make/gather
2: Put those plates together
3: Add wheels and you're done!

Step 3: Body

Picture of Body

The hardest step.... KEEP GOING!

1: make two of each of these
2: make/catch these pieces
3: Add white rods and blue rods. If you can't see the blue rods the next pic shows them better. Get that y clip too
4: Add that one layer
5: Add insides!
6: add the handle and those two other parts
7: add those panels
8: Add that last panel! Looking like a skorpion!

Step 4: Extras

Picture of Extras

Just make this stuff.......

Step 5: Bands and Adding Extras

Picture of Bands and Adding Extras

Title says all!


Kona-chan (author)2013-08-28

time to spread terror

knexguy237 (author)2012-11-24


~Meme~ (author)2012-02-17


Range= 5/10

Accuracy= 4/10

Capacity= 10/10

Looks 9/10

Over all= 7/10

I built it, and it is pretty good.

CODKING (author)2011-09-29

wich one of ur skorpians is better

~Meme~ (author)CODKING2012-02-17


Seleziona (author)CODKING2011-09-30

They're both really good. This one uses a firing pin, and the other one uses a different kind. I would recommend the V2, as it is smaller and more powerful.

ooocol22 (author)2012-01-11

what is the ammo??

~Meme~ (author)ooocol222012-02-17

Green rods.

knex_master of awesome (author)2011-08-02

ZOMG thank you for these instructions I modded mineon the mag
and added a ak-47 looking stock

No problem!
Cool :D

eLeMeNtLtd. (author)2011-06-30

dude aeronous u shouldnt make a chat box with al those comments :P

Eion (author)2011-06-26

Thanks dude keep making these instructions

SomeAsianKid (author)2011-04-12

2 things piece count (i think i got the piieces) and what stock?

knexp90 (author)2010-09-25

how is that top piece made

Seleziona (author)knexp902010-09-26

i don't have any more pics of it. Sorry!

Infernape86 (author)Seleziona2011-02-13

what is it for

AUG-5OM3 (author)2011-01-03

the first thing that happened when i shot it the yellow connector of the ram pin broke so i removed the last part of the baarel (inside plates) and now it works fine

Seleziona (author)AUG-5OM32011-01-03

Did you tape the ram up?

AUG-5OM3 (author)Seleziona2011-01-05

no so that's the problem .........
ok thanks

Seleziona (author)AUG-5OM32011-01-05

Alright, no problem.

Dr.Squirrel (author)2011-01-01

Epic! 5*

Seleziona (author)Dr.Squirrel2011-01-02

Thanks :D

slimshaddy (author)2010-12-26

what if you dont have flexi rod

Cheezpaper (author)2010-12-22

I'd totally make this except for the fact that I don't have a lot of green pieces as ammo and I'd lose them easily.

Seleziona (author)Cheezpaper2010-12-22

Yes, they do get lost easily. :/ Pretty much an indoor gun.

poellmac (author)2010-10-14

i dont have those ball socket thingies. are they needed. plz tell me someone??

MegaMetal8 (author)poellmac2010-12-05


monkeywarrior (author)2010-09-28

hey this design is great. so great that i was hoping you would let me use your mag design on a instructable im working on thnks

knexp90 (author)2010-09-25

this is awesome, i love it. the 3rd picture on step 3 is really blurry though.

Seleziona (author)knexp902010-09-26

oh, sorry.. And thanks a lot!

knexp90 (author)2010-09-25

never mind

jack691 (author)2010-07-23

i made a stock for it i might post it later on

GTRPLR1995 (author)2010-07-22

Awsome. 5*

iloveemogirls (author)2010-06-04

AWESOME!!!!!! the mage is and little flimsy but il mod it well done i would give you a billion stars if i could but i guess i can only give 5

MAGE???????????? MAGE!!!!!!!!!!!!!!!!!!!! IMA FIRE'IN MAH LAZER!!!! BWAAAAAAAAAAAHHHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Seleziona (author)iloveemogirls2010-06-08


pie25x (author)2010-06-03

I realized that shooting green rods isn't aa con becauze the Skorpion is a weak gun and I think it has a small caliber.

Seleziona (author)pie25x2010-06-04

Hey! You're right! But this gun sure isn't weak....

pie25x (author)Seleziona2010-06-05

Well, I'm talking about it being weak against rifles like an M4A1. I completed the Skorpion and I got it to shoot about 60-70 feet. Quite hard to pull the firing pin back now considering the amount of rubber bands I used.

pie25x (author)2010-06-03

Is there anything else I can use besides the red/pink bendy rod?

Seleziona (author)pie25x2010-06-04

Actually, you don't need it. It's just for looks, and it's kinda uncomfortable.

MegaMetal8 (author)2010-04-16

theres a stock?!

pie25x (author)MegaMetal82010-06-03


rootbeer96 (author)MegaMetal82010-04-17

finnally some one made a scorpian

Seleziona (author)MegaMetal82010-04-16

Build it from the pics if you want, but it's not really necessary, it's really flimsy and it's hard to pull the pin back with it down.

MegaMetal8 (author)2010-04-16

im making it now

iv done a mag and the handle

ill post pic when im done
ps- in step 4 theres the ram and mag pusher

whats the other thing and is it neccessary as i cant really see what its made up of

thnx megametal8

An Villain (author)MegaMetal82010-04-23

Why add a magazine in the handle? The Skorpion has a seperate clip.

Seleziona (author)An Villain2010-05-17

A mag AND the handle.

An Villain (author)Seleziona2010-05-17

I thought he wrote in.

Seleziona (author)An Villain2010-05-18

Oh, okay

About This Instructable




Bio: My name is Daniel, I am a computer engineering student. Cooking and baking are my passion, sharing the knowledge that absolutely anyone can cook outstanding ... More »
More by Seleziona:King of BrowniesThe Alpha MaleThe Gargoyle
Add instructable to: