Introduction: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

In this lesson you will learn to make a skull shaped button. Let's get started!

  1. Drag a Cylinder shape to the workplane.

Step 1: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Scale it to a height of 2mm and a diameter of 16mm.

Step 2: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Drag a Box shape to the workplane.

Step 3: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Scale it smaller to a height of 2mm and a size of 8mm x 8mm.

Step 4: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Drag a cylinder shape to the workplane and make it a hole.

Step 5: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Scale it smaller to a size of 2mm x 2mm. Move it to the location marked in orange.

Step 6: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Copy and paste the holes and move them to the areas highlighted in orange.

Step 7: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Drag a Box shape to the workplane and make it a hole.

Step 8: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Scale it smaller to a height of 2mm and a size of 1mm x 4mm.
  2. Move it to the area marked in orange.

Step 9: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Copy and paste the Box holes and move them to the area highlighted in orange.
  2. Don't forget you can adjust the Snap grid setting for more accuracy if needed.

Step 10: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Drag a Roof shape to the workplane.

Step 11: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Scale it smaller to a height of 3mm and size it to 3mm x 3mm.

Step 12: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Rotate and move the roof shape to the area marked in orange and make it a hole.

Step 13: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Select all the shapes and group them into a single object by clicking the Group button in the menu bar.

Step 14: Skull Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

Congratulations! You made it!

Comments

About This Instructable

79views

0favorites

License:

More by tinkercad-support:Create Your Superhero SuitCreate Your Superhero SuitCreate a Ballerina's Tutu
Add instructable to: