Introduction: Skydancer

Picture of Skydancer

Sorry for my English because i'm french my English is very bad !

Skydancers it's a human of plastic that dance with air product through fan.

starting!

Step 1: Material

Picture of Material

You are need:

-fan 220v https://www.google.fr/aclk?sa=l&ai=DChcSEwj0nPjX57...

-cut

-paint pen(posca)

-meters

-trash bag 20 L

-fat tape

Step 2: Cutting

Picture of  Cutting

Cut the trash bag lengthwise.

Caution you not cut bottom to trash bag!

Next you must calculated the perimeters of the fan.

Lastly,you must cutting within th perimeters of the fan !

Step 3: Painting

Picture of Painting

Paint the trash bag with the paint pen !

paint eyes;mouth....

Step 4: Past

Picture of  Past

past strip of the tape below the trash bag!

Step 5: Sewing

Picture of  Sewing

Sew the trash bag lengthwise.

Now it's tube.

Step 6: Finish

Picture of  Finish

Cut the strip up to trash bag for create hair.

Step 7: It's Finish

Picture of  It's Finish

Put the skydancers on the fan and turns the fan and tadam it's finish!

Comments

LümiD (author)2018-01-07

it's very great!!!!!

BarryMcGowan (author)2018-01-06

tadam?

Innovation3 (author)BarryMcGowan2018-01-06

sorry "tadam" it's french ! tadam = all done

Swansong (author)2018-01-04

That's a really cute one! Great simple build :)

Innovation3 (author)Swansong2018-01-04

thanks you ! :)

About This Instructable

462views

5favorites

License:

More by Innovation3:Skydancer
Add instructable to: