Print PDF
Favorite
Email
Step 2Step 2 - the material
1. Buy some 3 mm thick Plexiglas (acrylic) or you can buy thicker, it must be 3 mm or more to have the stability to hold your Ipad.
2. Cut out a piece of the glass, I chose 150 mm X 60 mm
3. I masked the piece to prevent it from being scratched from the jigsaw
2. Cut out a piece of the glass, I chose 150 mm X 60 mm
3. I masked the piece to prevent it from being scratched from the jigsaw
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
1
May 6, 2010. 10:43 AMTim Temple
says:
You're going to need to sand or router the edge to make it look decent.
Reply
 |
Add Comment
|
