Print PDF
Favorite
Email
Step 3Build the stands
Once you figure out the height of your reservoir, you can start designing your stands. Mine is about 13" tall, so my stands are 13", 14", 15", and 16". After cutting the lengths, I cut a triangle (with a height of 2.5") out of each one to hold the PVC.
I'll assume you've already cut the PVC in half...it doesn't really deserve it's own step.
Next, I attached them together with the 2x4's. I found out the hard way that it's easier to make them level if you attach the 2x4's mid way up, instead of at the bottom.
I'll assume you've already cut the PVC in half...it doesn't really deserve it's own step.
Next, I attached them together with the 2x4's. I found out the hard way that it's easier to make them level if you attach the 2x4's mid way up, instead of at the bottom.
| « Previous Step | View All Steps | Next Step » |
 |
Add Comment
|
