Instructables

Small Scale Team Fortress 2 Grenade Launcher Model

Step 4: Trigger and Crosshair

Picture of Trigger and Crosshair
16.JPG
21.JPG
19.JPG
20.JPG
The trigger and crosshair are both made from strips cut from the tin.

The crosshair can be made much larger to look like the original if you like. It can be mounted with double sided tape and then painted.

The triggerguard and trigger are just 2 strips inserted into grooves in the wood put in by a knife. (Make sure to put glue in the grooves first)
 
Remove these adsRemove these ads by Signing Up