Picture of Small airsoft target
This is another target idea I came up with.

Just like the other one, feel free to make suggestions.
Remove these adsRemove these ads by Signing Up

Step 1: What you need

Picture of What you need
You need a cup, a rubberband, and a napkin.

Step 2: Cup and napkin

Picture of Cup and napkin
Lay the napkin down, centered, on the open part of the cup

Step 3: Done!

Picture of Done!
Wrap the rubberband around the cup so the napkin seals the cup.

Step 4: Also...

Picture of Also...
If your airsoft gun is too weak then rip the napkin in half and then place it on the cup.

Step 5: Damn!

I made an extra page again!
Wolf Seril6 years ago
(removed by author or community request)
I deleted this comment because it was dumb and I hadn't even tried the instructable. I think I was just having a bad day.
Btw, mine worked fine, exept afterwords the cup was sorta shredded...
yeah like AZNpwnage said. it works perfectly. you must have a weak gun :|
I have those same cups!!!
same here!
GEEK15 years ago
I made one with a plastic box and paper but after I shot it I couldn't find the bbs inside and I found out that the bbs penetrated the box and there were interesting patterns on the box.
ryanminty GEEK14 years ago
dont re-use bbs when you shoot them the chip and thell chip inside your barrel and completey ruin ur rifle/gun
yobwoc4 years ago
thing 25 years ago
cool instructable i would have never thought of it! P.S. what king of gun do you have? thanks
AZNpwnage (author)  thing 25 years ago
thanks im not really sure what gun i have its a $20 crossman m70 mini electric im kinda cheap so i don't like to spend so much money on things lol
haha that seems like something i would do... 
sharlston5 years ago
ive made 20 of tyese onta a piece of ply wood for my black widow and my daisy
crayzclown15 years ago
lol awesome
codester6 years ago
Hey! Great job! Simple but good!
AZNpwnage (author)  codester6 years ago
thanks and also wolf seril, i tried it out and the BB's do pierce the cup flawlessly