Print PDF
Favorite
Email
Step 11Securing your information
Once all of the stain and varnish has dried, put the drive in the slot (if you haven't already). When I did this, There was a gap between the metal USB dongle and the wooden gap. I filled this gap with a tiny bit of superglue (I don't think superglue or epoxy is necessary, but it's all up to you) and sanded it flush with the wood surface.
The most important thing here is to make sure that enough of the USB dongle is sticking out to plug into the USB port. Be sure to test this before applying the glue.
The most important thing here is to make sure that enough of the USB dongle is sticking out to plug into the USB port. Be sure to test this before applying the glue.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
