Print PDF
Favorite
Email
Step 2Disassembling the Drive
Since we can't make a thumb drive out of wood, we'll have to take an existing one apart. Most of these drives come apart with a flathead screwdriver and a little "persuasion". Be careful not to damage the drive though!
Once you get the plastic casing apart, the jump drive should slide right out. The Cruzers have a white plastic guard around the circuitry, which you may either remove or leave on.
Once you get the plastic casing apart, the jump drive should slide right out. The Cruzers have a white plastic guard around the circuitry, which you may either remove or leave on.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
