Print PDF
Favorite
Email
Step 7Door added and frame Painted
Door is now fabricated and placed. The door is made by bending two pieces of tube, welding little tabs with holes in them to the inner one, and then attaching a piece of sheet metal. The two bent "U"s are connected with 2 hinges. The door is dressed up with a porthole cutout and 2 decorative straps. With the spiral frame and door in place we can now start to fill in the metal "growth rings" of the frame, but before we weld anything more we need to paint the frame, pan, running gear, and rims.
As the old ones are cracked and don't match, new tires are purchased and mounted.
As the old ones are cracked and don't match, new tires are purchased and mounted.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
