Print PDF
Favorite
Email
Step 6Setting the Alarm
Setting the alarm requires a couple steps.
1) Set the time, school name, and closings website in PySchoolClock (Military Time) (clock-gui.exe)
2) Save settings in PySchoolClock
3) Plug in box to computer, Alarm Clock into box
4) Set alarm clock for at least 2 minutes after computer.
5) Open up clock and make sure that every thing is working (Internet, Power, Clock is connected
6) Change mode on box to automatic. Make sure that the light on the alarm clock goes on signaling that it has been turned on.
7) See if it works!
1) Set the time, school name, and closings website in PySchoolClock (Military Time) (clock-gui.exe)
2) Save settings in PySchoolClock
3) Plug in box to computer, Alarm Clock into box
4) Set alarm clock for at least 2 minutes after computer.
5) Open up clock and make sure that every thing is working (Internet, Power, Clock is connected
6) Change mode on box to automatic. Make sure that the light on the alarm clock goes on signaling that it has been turned on.
7) See if it works!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
