Print PDF
Favorite
Email
Step 6Hole in the head.
It turns out the strange plastic candle is both the perfect size to fit inside the snowman's hat and also, if you remove the fake flame, has the perfect size hole to fit the 1/8" mono audio jack.
Insert the audio jack into the hole and then pull the hookup wires attached to the jack through the switch hole in the back and screw it back shut.
Flip the head inside out, cut the center and unstuff it. Flip it back the right way once done.
Insert the round casing with the jack in it. Poke a hole in the center of top of the snowman's head an insert the jack through. Fasten the jack on by screwing a nut onto its treads.
Restuff the head as best you can.
Insert the audio jack into the hole and then pull the hookup wires attached to the jack through the switch hole in the back and screw it back shut.
Flip the head inside out, cut the center and unstuff it. Flip it back the right way once done.
Insert the round casing with the jack in it. Poke a hole in the center of top of the snowman's head an insert the jack through. Fasten the jack on by screwing a nut onto its treads.
Restuff the head as best you can.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
