Print PDF
Favorite
Email
Step 7Finish up the circuit.
Finish wiring up the circuit as seen in the wiring diagram. That means connecting the switch to the red wire for the speaker and the red wire for the 1/8" jack. In the middle terminal on the switch you are going to want to connect to the photocells.
Also, connect the black wire from the 1/8" jack to all the other black wires.
Sew the 4 switches into the back of the head. Those being the three switches for the audio and the one to switch between output sources.
Put tape around the speaker so that it insulates it and keeps the front end from coming into contact with the photocells. Put the speaker face down into the bottom of the snowman. Also, tape the battery into place so that it doesn't fall out.
Also, connect the black wire from the 1/8" jack to all the other black wires.
Sew the 4 switches into the back of the head. Those being the three switches for the audio and the one to switch between output sources.
Put tape around the speaker so that it insulates it and keeps the front end from coming into contact with the photocells. Put the speaker face down into the bottom of the snowman. Also, tape the battery into place so that it doesn't fall out.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
