Step 3: Shape the plate surface.
This step is pretty simple, but it is kind of time consuming. You have to carve a channel in the plate. The purpose of this is to fit on the rail, ledge, or whatever you are grinding on.
Its kind of hard to explain, so I made a picture that does it for me.
I used the grinder to carve out an arc, until the grinders umm... curve got too wide for the arc I had drawn. Then I used the belt sander, which took a little while. I also sanded the edge to make it easier to grind with your shoe at an angle.
Its kind of hard to explain, so I made a picture that does it for me.
I used the grinder to carve out an arc, until the grinders umm... curve got too wide for the arc I had drawn. Then I used the belt sander, which took a little while. I also sanded the edge to make it easier to grind with your shoe at an angle.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
