Print PDF
Favorite
Email
Step 4Cutting the shoe
Now comes the fun part: cutting up a pair of shoes.
use the hacksaw and cut along the line at the front and back of the plate. cut so that is is deep enough to fit the whole plate, but not so deep that it cuts into the sole. Then, bend the front part back, allowing you (with a little difficulty) to cut along the lenght of the shoe to the cut you made where the back of the plate would be. smooth up all the cut parts, and try to make them as even as possible.
Since I am already using the shoes that I made, I used a different pair for this step.
use the hacksaw and cut along the line at the front and back of the plate. cut so that is is deep enough to fit the whole plate, but not so deep that it cuts into the sole. Then, bend the front part back, allowing you (with a little difficulty) to cut along the lenght of the shoe to the cut you made where the back of the plate would be. smooth up all the cut parts, and try to make them as even as possible.
Since I am already using the shoes that I made, I used a different pair for this step.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
